Product ID Labels: Where to Find Codes on Product Packaging
Product ID
Definition
A product ID is an identifier used to distinguish a product or product record in a catalog, ecommerce platform, or inventory system. Depending on the system, it may be an internal ID or a standardized code such as a GTIN.
Overview
Product ID labels are usually found in four places on packaged goods: the retail carton or shelf-facing package, the product hang-tag or label, the case/case label applied for distribution, and the carrier shipping label on the outer carton. To locate a product id label quickly, inspect the retail carton and case label first for UPC/EAN/GTIN barcodes and printed SKUs or model numbers; avoid scanning the carrier shipping label unless you are identifying the shipment rather than the item.
Knowing where each code lives and what it identifies prevents wrong-item receiving, helps with traceability (lot/serial), and speeds put-away. The guidance below explains which label to read for item-type identification versus shipment- or unit-level identification, provides clear sample callouts you can illustrate, and covers faded or missing labels, private-label complications, relabeling by a 3PL, and practical steps to avoid scanning the wrong barcode in receiving.
Common Places To Find Codes On Packaging
Inspect these four packaging locations in this order when looking for a product id label:
- Retail Carton / Shelf Packaging: Usually shows the UPC/EAN/GTIN near the bottom or on the back panel, model number near the product name, and sometimes MPNs (manufacturer part numbers).
- Product Tag / Hang-Tag: Textile and small-item tags often carry the SKU, model number, and sometimes a short GTIN barcode; tags can be the easiest place to find the merchant's internal product ID.
- Case / Distribution Label: Applied to the outer case for logistics — this label commonly contains a case-level GTIN, quantity, case SKU, lot/batch number, and occasionally serial ranges.
- Carrier Shipping Label / Pallet Markings: Identifies the shipment (waybill/PRO/BOL number, pallet ID); it is not normally the product id but can include a case-level barcode added by the shipper or carrier.
What Each Code Typically Means
Different codes answer different questions. Read the right one for the task:
- GTIN/UPC/EAN: Identifies the item type or SKU at retail (what is the product?). Use this when you need the standard marketplace identifier.
- SKU / Merchant Item ID: Internal identifier used by a retailer or merchant for inventory and pricing (how we track it internally).
- Model Number / MPN: Manufacturer identifier that describes form, fit, or function (which variant is this?).
- Lot / Batch Number: Links a group of units produced together — required for recalls, expiration tracking, and quality control (which batch?).
- Serial Number: Unique to a single unit for warranty, returns, or repair (which exact unit?).
- Shipping/Waybill Labels: Identify the shipment and routing, not the underlying product (which shipment/consignment?).
Item-Type Versus Shipment Versus Unit-Level Labels
When you inspect a package, decide whether you need to identify the product type, the shipment, or the specific unit. The GTIN and SKU identify item type; lot and serial numbers identify unit-level traceability; the carrier label identifies the shipment. Mistaking one for another causes wrong inventory records (e.g., scanning a pallet barcode into the item-level field).
Sample Label Callouts A Writer Can Illustrate
Use these callout descriptions when creating an annotated photo or diagram for training materials:
- Callout - GTIN / UPC Barcode (Retail Panel): 12-digit UPC barcode printed on the back/bottom near nutrition or legal text — label this as the primary product identifier for retail sales.
- Callout - Manufacturer Model Number: Small alphanumeric group near the brand name ("Model: ABC-123"). Mark as the manufacturer identifier or MPN.
- Callout - Merchant SKU / Item ID: Usually a short code on a hang-tag or near the barcode printed by the merchant ("SKU: 456-789"). Label as the internal stock identifier.
- Callout - Case / Carton Label: Large white sticker on the case edge with case GTIN, quantity, lot number and possibly a human-readable case SKU — mark each field (GTIN, QTY, LOT).
- Callout - Serial Number Sticker: Small label on the item or inner packaging with a unique serial (10–20 chars) — mark as unit-level traceability.
- Callout - Carrier Shipping Label: Top or side of outer carton with airway bill / PRO number and routing barcode — label as shipment identifier only.
When Labels Are Faded, Missing, Or Illegible
Faded or missing product id labels are common after transit. Use these steps:
- Cross-Reference: Match the packing slip or ASN to case counts and check for printed SKUs or model numbers elsewhere on the package.
- Use Alternative Codes: If the UPC is unreadable, look for printed model numbers, MPN, or SKU that your WMS can map to the GTIN.
- Verify Physically: Open a unit to find intact inner labels or tags, then record the correct product id in the system and apply a replacement case label.
- Document And Quarantine: Tag the carton as "inspection required" in the WMS if you cannot safely identify the contents.
Private-Label Items And Relabeling By A 3PL
Private-label goods and 3PL relabeling create extra identification layers. Private-label products may carry the retailer's SKU and a different GTIN from the manufacturer. Similarly, a 3PL may apply their own receiving label or add a warehouse-assigned barcode. Practical steps:
- Preserve Original Identifiers: When a 3PL relabels, keep the manufacturer GTIN and serial/lot information visible or recorded in the receiving record.
- Map Identifiers In The WMS: Create crosswalks between merchant SKUs, manufacturer GTINs, and any 3PL labels so scanning any of them resolves to the correct product record.
- Policy For Over-labeling: Require that relabels include an overlay that shows both the new warehouse ID and the original product identifiers.
How To Avoid Scanning The Wrong Barcode During Receiving
Receiving teams commonly scan the carrier label or a pallet ID instead of the product id. Reduce errors with process and technology controls:
- Receiving Workflow: Train staff to scan the case-level GTIN or SKU label first, then any serial or lot stickers. Do not accept a scan-only workflow that records the waybill as the item.
- Scanner Configuration: Configure handheld scanners to prefer specific symbologies (e.g., UPC/EAN/GS1-128) and to ignore large-format courier barcodes of known formats.
- WMS Validation Rules: Implement length or pattern validation (e.g., GTIN=12/13/14 digits) so the system flags improbable scans and prompts for re-scan or manual verification.
- Visual Placements: Standardize where case labels should be placed (upper-right panel) to reduce accidental scans of other barcodes.
Practical Receiving Checklist For Product ID Labels
Use this short checklist at dock door to confirm the correct product id label is captured:
- Step 1: Compare packing list/ASN to PO line and expected GTIN/SKU.
- Step 2: Scan the case-level GTIN or merchant SKU — do not scan the carrier label first.
- Step 3: If the GTIN is unreadable, open a sample unit to find inner tags or model numbers and record a replacement label.
- Step 4: Record lot/serial if present; attach notes to the receiving transaction in the WMS.
- Step 5: If a 3PL or private-label relabel exists, verify crosswalk mapping before put-away.
In short, the Product ID on packaging will most reliably be the GTIN/UPC on the retail panel or the case label for distribution, while SKUs, model numbers, lot numbers, and serials provide complementary item-level or unit-level identification. Inspect the retail carton, product tag, case label and avoid scanning carrier shipping labels when the goal is to identify product — use WMS mapping, scanner configuration, and clear receiving procedures to prevent the common mistakes of scanning the wrong barcode or losing traceability on relabeled inventory.
Sources And Additional Reading (4)
- Barcodes
“Barcodes.” GS1, https://www.gs1.org/standards/barcodes.
- GTIN: Global Trade Item Number
“GTIN: Global Trade Item Number.” GS1, https://www.gs1.org/1/gtin.
- Barcode Basics
“Barcode Basics.” GS1 US, https://www.gs1us.org/resources/tools/barcode-basics.
- Unique Device Identification (UDI) System
“Unique Device Identification (UDI) System.” U.S. Food & Drug Administration, https://www.fda.gov/medical-devices/unique-device-identification-system-udi-system.
More from this term
Looking for a 3PL?
Compare warehouses on Racklify and find the right logistics partner for your business.